Description
GEBERIT DUOFIX KAPPA UP200 WC TOILET CISTERN FRAME 820MM WALL SHORT PROJECTION COMPACT
Geberit 111.260.00.1 Details
Application
- For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centers
- For installation in a partial-height Duofix system wall in front of a solid or drywall construction
- For mounting in front of a solid or drywall construction
- For a screed of 0–20 mm
- Any boarding must be fixed tight up against the face of the Duofix frame and screwed directly to the frame
- Note: If frame is being installed with bespoke furniture with furniture clips, we would advise that article 111.837.00.1 is purchased
Characteristics
- Self-supporting
- Frame with C profile 40/40 mm
- Powder-coated frame, ultramarine blue
- Frame with holes ø 9 mm for fastening in wood frame construction
- Galvanized leg support, sleeplessly adjustable 0–20 mm
- Feet can be retracted 50 mm
- Rotating foot plate, for installation in UW50 profiles
- Fast adjustment of the actuator rods for flush plate
- Protection housing for service opening, can be cut to length
- Frame height 820 mm
- With wall anchors to allow up to a 200 mm duct. For larger ducts up to 400 mm use extension bolts 111.887.00.1
- Geberit Kappa concealed cistern 15 cm with front actuation
- Dual flush with Kappa flush plates - need to be purchase separately
- Dual flush with pneumatic buttons - need to be purchase separately
- Water supply connection on the left side
- Fastening for outlet bend sound-absorbing
- Connection hose to angle stop valve can be screw-connected by hand
- For pans with contact surfaces smaller than 170 mm (see accessory 111.847.00.1)
- To reduce flush volume to either 4.5/3 l dual flush or 4/2.6 l dual flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
- The cistern can be operated with used water (rainwater) provided it is passed through a filter system first
- Flow pressure range - 0.1 to 10 bar